Multi ID cutter UNI 100-1600
For burr-free cutting of cardboard tubes with different diameters on the same cutting mandrel.
Mode of operation
  • The tube is pushed onto a cutting mandrel
  • The cutting mandrel is smaller than the tube inside diameter, meaning that it fits for the entire diameter range
  • The cut section length is programmed and the machine started
  • The start of the tube is automatically detected by a sensor
  • A trim cut is first performed, after which the tube is divided according to the programmed cut section length
  • A pusher ejects the individual cut sections off the mandrel
Equipment
  • Input terminal for programming the required cut section length and number
  • Automatic scanning of the parent tube length, the blade unit is then self-setting
  • Automatic scanning of the tube wall thickness, the blade unit is then self-setting
  • Automatic set-up of the guide rollers, for cutting the machine adjusts automatically to the tube diameter
  • Positionable blade holder including circular blade and absorber unit
  • Blade drive with controllable speed, suitable for cutting thick-walled tubes
  • Blade lubrication for smooth cutting surfaces
  • A pusher for the cut sections. The narrow sections are prevented from tipping by a stabilizer
  • Tube infeed system with magazine for automatic feeding into the machine. The magazine is designed for ergonomic insertion into the magazine
  • Height adjustment of the infeed system by means of electric motors
  • Cutting mandrel with easy-exchange polyamide bushes
  • Levelling elements for precise machine alignment
  • CE safety features
Technische Daten