UNI 100-1600 – Tubes up to 1m diameter

This system was specially designed for manufacturers of sheet metal. But this system is also used wherever large diameters are required.
By using a central cutting mandrel, different core diameters can be cut without any setup times.
In addition to paper cores, soft plastic tubes can also be cut easily.

More detailed views UNI 100-1600

UNI 100-1600

Mode of operation

  • Full-automatic corecutting machine for small and medium quantities.
  • Comprehensive protective measures for safe operation.
  • The core is pushed on a central cutting mandrel for the entire core diameter range.
  • The machine is adjusted by itself, which means there is no need to change the tool set.
  • Cutting length and quantity are programmed on a touch panel.
  • Automatic length detection of the core.
  • Extremly low maintenance.
  • Also available as semi-automatic version
  • CE – safety devices.

Technical data

Technical data

Core diameter

min. inside:
approx. 150 mm

max. outside:
approx. 1050 mm
   
Wall thickness max. approx. 30 mm
   

Core length
uncut

 approx. 1695 mm
   
Cutting length

min. approx. 3 mm
max. approx. 1650 mm
   
Cutting speed*

approx. 20 cuts / min
ø 500 x 8 mm, 150 mm length
 

*depending on quality and
thickness of the core

Datasheet UNI 100-1600

Do you have other requirements or specifications?

We would be pleased to face your requirements as an innovative and experienced partner in the sector of special machines.
Feel free to contact us directly!